300-425 exam questions | Pass4itsure Discounted Real Exam Questions And Answers For Practicing Before Exam Guaranteed Success On First Try

Welcome to your free Cisco 300-425 exam questions to pass 300-425 exam

QUESTION 1Guest anchoring is configured for a newly created SSID for your company. It has been noticed that the mobility tunnels
are not up, and that MPING fails from your foreign WLC to the anchor WLC. What is the reason that it is failing?

A. A rule is needed at the firewall to allow UDP port 16666 for communication to work.

B. A rule is needed at the firewall to allow UDP port 97 for communication to work.

C. A rule is needed at the firewall to allow TCP port 97 for communication to work.

D. A rule is needed at the firewall to allow TCP port 16666 for communication to work.

QUESTION 2A customer is running a guest WLAN with a foreign/export-anchor setup. There is one anchor WLC in the US and two in
Europe. Anchor WLC priorities are used to prefer local anchors. During a routine network audit, it is discovered that a
large number of guest client sessions in the US are anchored to the WLCs in Europe. Which reason explains this
behavior?

A. The foreign WLC failed and recovered.

B. The US anchor WLC failed and recovered.

C. The US anchor WLC is anchored to itself with a priority value of zero.

D. The anchor WLC is in the same mobility group.

QUESTION 3An engineer has configured guest anchoring for a newly created SSD however, the mobility tunnels are not up, and
EPING is failing from the foreign WLC to the anchor WLC. Which traffic flow must be allowed at the firewall to enable
the communication?

A. UDP port 16666

B. IP protocol 97

C. UDP port 97

D. TCP port 97

QUESTION 4A network engineer is working on a design for a wireless network that must support data, voice, and location services.
To support these services, which access point placement must the engineer use?

A. corner only

B. perimeter and corner

C. perimeter only

D. indoor and outdoor

QUESTION 5A wireless network consultant must assess an existing wireless LAN controller. Which section must the consultant
check before replacing the old APs with APs that are IEEE 802.11ac-capable?

A. number of AP licenses

B. controller PSU

C. throughput capacity

D. software version

QUESTION 6An engineer must create data link redundancy for the company\\’s Cisco Wireless LAN controller. The engineer has
decided to configure LAG-based redundancy instead of port-based redundancy. Which three features of LAG-based
did redundancy influence this decision? (Choose three.)

A. Packets are always sent out on the same port they are received on.

B. All interface traffic passes as long as one port is up.

C. The same port has multiple untagged dynamic interfaces.

D. Interface connection to two separate nonstacked switches is available.

E. Full bandwidth of all links is available.

F. Ports are grouped into multiple LAGs.

QUESTION 7A customer is concerned about mesh backhaul link security. Which level of ecnryption does the backhaul link use?

A. hash

B. AES

C. WEP

D. 3DES

QUESTION 8What is the recommended cell overlap when designing a wireless network for Cisco Hyperlocation?

A. 20%

B. 30%

C. 40%

D. 50%

QUESTION 9 Dumpclick 300-425 exam questions-q9

Refer to the exhibit. Which two statements about Cisco Prime Infrastructure are true? (Choose two.)

A. It presents the recommended number of APs for the selected coverage area based on the selections made.

B. Planning mode requires a special license in Cisco Prime Infrastructure.

C. It shows the map editor feature in Cisco Prime Infrastructure.

D. Controllers must be synchronized with Cisco Prime Infrastructure for planning mode to work.

E. It shows the planning mode feature in Cisco Prime Infrastructure.

QUESTION 10An engineer must create data-link redundancy for the company\\’s Cisco Wireless LAN Controller. The engineer has
decided to configure LAG-based redundancy instead of port-based redundancy. Which three features of LAG-based
redundancy influenced this decision? (Choose three.)

A. Packets are always sent out on the same port they are received on.

B. All interface traffic passes as long as one port is up.

C. The same port has multiple untagged dynamics interfaces.

D. Interface connection to two separate nonstacked switches is available.

E. Full bandwidth of all links is available.

F. Ports are grouped into multiple LAGs.

QUESTION 11During a client roaming event, which device is responsible for communicating the new Layer 2 EID mapping of a
wireless supplicant to the fabric domain?

A. WLC

B. BN

C. CP2

D. CP1

QUESTION 12Which non-Wi-Fi interferer can be identified by Metageek Chanalyzer?

A. PDAs

B. jammers

C. smartphones

D. printers

QUESTION 13Where must the APs be mounted when used in a high-density wireless network to provide 6 dB to 20 dB of attenuation
to a cell?

A. in the aisle

B. under the seat

C. above the stage

D. under the stage

Pass4itsure Discounted Real Exam Questions And Answers For Practicing Before Exam Guaranteed Success On First Try

Category: 300-425 exam questions

[2020.12] Try, Share Cisco 300-425 Exam Dumps Questions, Cisco 300-425 Practice Test Free Online

Free Cisco 300-425 exam questions from Youtube

Free Cisco 300-425 PDF download

New updated Cisco CCNP 300-425 practice test free online

Reason for selection – Pass4itsure

Share latest Pass4itsure Cisco dumps discount code 2020

Pass4itsure discount code list 2021

Why Pass4itsure

Categories

Recent Posts

Latest Popular Microsoft Practice test

Latest CompTIA Exam Dumps