Has anyone taken Cisco 210-065 dumps? The Implementing Cisco Video Network Devices v1.0 (210-065 CIVND) exam is a 75 Minutes (55 – 65 questions) assessment in pass4itsure that is associated with the CCNA Collaboration,Cisco Video Network Specialist certification. Get risk free Cisco 210-065 dumps CIVND exam Cisco Certified Network Associate Collaboration certification try free demo is what you need to take. “Implementing Cisco Video Network Devices v1.0” is the exam name of Pass4itsure Cisco 210-065 dumps test which designed to help candidates prepare for and pass the Cisco 210-065 exam. Cisco Certified Network Associate Collaboration certification validates your ability to Video Concepts, Troubleshoot and Support and Video Concepts. These https://www.pass4itsure.com/210-065.html dumps skills allow you to simplify and standardize the most complex daily activities running your team increase your credibility and value within the organization.

[Up To Dated -2018 Cisco 210-065 Dumps From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWQk1xeU5TZ3ExalE

[Up To Dated -2018 Cisco 400-251 Dumps From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWN3NKQ2VvYmxCMDg

Objectives of 210-065 Exam:

CCNA Collaboration 210-065 Dumps CIVND describes the following topics areas

• Video Concepts
• Endpoint Configuration
• Troubleshoot and Support

Kill your exam with Cisco 210-065 dumps real questions(1-28)

QUESTION 1
In this item, you will need to use all information presented to you to successfully answer the question.

The C-Series endpoint (codec) does not register with the Video Communication Server that is located in a different network. Based on the exhibits, what could be causing the issue?
A. The subnet mask on the codec is incorrect.
B. The ip address of the codec is incorrect.
C. The interface that the codec is in is in the wrong VLAN.
D. The codec did not receive a DHCP address from the DHCP server.
210-065 exam Correct Answer: A

QUESTION 2
Which Cisco TelePresence multipoint platform utilizes only Cisco Unified Communications Manager for call control?
A. Cisco TelePresence Multipoint Control Unit
B. Cisco TelePresence Multipoint Switch
C. Cisco TelePresence Server
D. Cisco TelePresence Media Bridge Server
E. Cisco TelePresence System 500-32
F. Cisco TelePresence SX20
Correct Answer: B

QUESTION 3
Refer to the exhibit.

Which kind of profile is shown?
A. TC WebAdmin H.323 Profile
B. TC WebAdmin SIP Profile
C. TX WebAdmin SIP Profile
D. TC WebAdmin Conference Profile
210-065 dumps Correct Answer: B

QUESTION 4
Refer to the exhibit.

Which two strings that could be dialed to start a multipoint conference that is hosted by the multipoint control unit? (Choose two.)
A. 52900121
B. [email protected]
C. [email protected]
D. 5919
E. ex90
F. [email protected]
Correct Answer: DF

QUESTION 5
Your customer reports that new A/V equipment that plays movies cannot be displayed on their Cisco TelePresence endpoints. This A/V equipment is connected to the Cisco TelePresence codec via an HDMI cable. However, older A/V gear that uses composite cables is able to display content. What is most likely the cause of this issue?
A. The composite cables are faulty.
B. TIP negotiation is failing between the A/V gear and the Cisco TelePresence device.
C. The A/V gear is using HDCP to prevent illegal copying.
D. The operating system for the A/V gear is not compatible with the operating system of the Cisco TelePresence device.
210-065 pdf Correct Answer: C

QUESTION 6
What is the correct order of steps to schedule a One Button to Push conference call between a Cisco TelePresence System 500 and a Cisco TelePresence Codec C40?
A. Configure the One Button to Push field under device configuration for the Cisco TelePresence System 500 and Codec C40.
B. Configure One Button to Push under Cisco TelePresence Video Communications Server andgt; Applications andgt; OBTP Configuration.
C. Configure a new conference under Cisco TelePresence Management Suite andgt; Booking New Conference andgt; Type.
D. The One Button to Push feature cannot be configured without a scheduling plug-in application such as Microsoft Outlook.
E. Configure the Scheduler tool in the Cisco TelePresence Management Suite.
Correct Answer: C

QUESTION 7
Which two additional items must be configured for an endpoint to register manually with the Cisco TelePresence Video Communication Server for the SIP to function correctly? (Choose two.)
A. E.164 alias
B. H.323 ID
C. SIP uniform resource indicator
D. configured SIP registrar and proxy server
E. NTP server IPv4 address
F. unique system ID
210-065 vce Correct Answer: CD

QUESTION 8

When the Cisco Jabber usertries to call extension 3501, Cisco Jabber never places the call No errors or messages are seen and no reordertone is heard. Assuming that the Cisco Jabber calling search space is configured correctly in Cisco Unified Communications Manager, which of these could be causing this issue?
A. CTI for the end user must be enabled.
B. Cisco Jabber must be reconfigured for desktop mode.
C. The username or password is misconfigured in Cisco Jabber.
D. The Cisco Jabber Advanced Phone Settings are misconfigured.
E. Cisco Jabber does not have the correct phone button template and hence has not registered to the Cisco Unified Communications Manager.
F. The called user presence status is unknown.
G. The called user has not been added as a contact in Cisco Jabber.
Correct Answer: D

QUESTION 9
Which video input port is available on a Cisco DX80?
A. DVI-D
B. DVI-A
C. VGA
D. HDMI
210-065 exam Correct Answer: D

QUESTION 10
A user is currently on a Cisco TelePresence call using a Touch 8 device and would like to change the local screen layout so that the active speaker is in full screen and the other participants are smaller within the picture. Which layout option should the user choose?
A. Prominent
B. Overlay
C. PiP
D. FullScreen
Correct Answer: B

QUESTION 11
A customer has a data and VoIP converged network and would like to add video to this network. Which two key QoS elements should be included in the new network design? (Choose two.)
A. Configure bandwidth management features to smooth bursty traffic and mitigate end-to- end congestion.
B. Assign a high priority to transactional traffic to maintain quality of business traffic.
C. Keep video traffic on the low latency queue and move voice traffic to a lower-priority queue.
D. Apply bandwidth control features that will guarantee bandwidth for the maximum possible amount of video traffic.
E. Assign both video and voice traffic to use the highest-priority queue.
210-065 dumps Correct Answer: AD

QUESTION 12
Which type of Cisco VCS log shows call routing decisions that are made based on Cisco VCS search rules?
A. Event Log
B. Configuration Log
C. Network Log
D. System Log
Correct Answer: C

QUESTION 13
A customer is looking for a Cisco TelePresence Immersive System that is designed for at least seven participants. Which two products meet this customer\’s requirements? (Choose two.)
A. Cisco TelePresence CTS3022
B. Cisco TelePresence TX9000
C. Cisco TelePresence TX9200
D. Cisco TelePresence IX5000
E. Cisco TelePresence IX5200
F. Cisco TelePresence TX1310-65
210-065 pdf Correct Answer: CE

QUESTION 14
Cisco TMS is unable to manage endpoints and an engineer is required to capture logs to determine the cause. What is the menu path that the engineer should follow to capture and download logs from Cisco TMS?
A. Administrative Tools andgt; Diagnostics andgt; TMS Tickets
B. Administrative Tools andgt; TMS Server Maintenance andgt; Download Diagnostic Files
C. Systems andgt; Navigator andgt; Diagnostics andgt; Download Diagnostic Files
D. Systems andgt; Navigator andgt; TMS Logs
Correct Answer: B

QUESTION 15
In a Multiway call escalation, which SIP message is sent from the Multiway initiator to the participants to provide the bridge URI?
A. TRANSFER
B. REFER
C. REDIRECT
D. 200 OK
210-065 vce Correct Answer: B

QUESTION 16
Which two endpoints support the multisite option? (Choose two.)
A. C20
B. SX10
C. Jabber
D. SX-20
E. EX90
F. EX60
Correct Answer: DE

QUESTION 17
An engineer is deploying a Cisco Media Experience Engine 3500 to provide various capabilities for ingesting and processing video media and production capabilities. Which two advances does the Cisco MXE 3500 provide? (Choose two.)
A. automated graphical integration that can embed metadata overlays on videos during processing
B. over 2 terabytes of storage for both local and streaming media applications
C. automated ingesting of video files based on watch folders
D. clustering capability of up to 20 resource nodes to handle and balance incoming media requests and processing
E. live output abilities to provide DV, DVC Pro, DVC Pro 50, and DVC Pro HD format streams
F. ability to create VoD file outputs to WebEx ARF format
210-065 exam Correct Answer: AC

QUESTION 18
Cisco Video Surveillance Video Encoder cards perform which function?
A. the ability to use existing analog equipment with an IP-enabled video surveillance system
B. the ability to convert low-resolution video to high-definition video for video surveillance
C. the ability to stream digital media to digital media in an IP-enabled video recording environment
D. the ability to encrypt raw video signals to secure video signals
Correct Answer: A

QUESTION 19
Which configuration is needed in order for Cisco Jabber Video for TelePresence to initiate Multiway calls?
A. Configure the Multiway address under Video Settings in the Cisco Jabber Video for TelePresence client.
B. Configure the Mutliway URI address under TelePresence Management Suite andgt; Systems andgt; Provisioning andgt; Users andgt; Configuration Template.
C. Configure the Mutliway URI address under Cisco TelePresence Video Communications Server andgt; Applications andgt; Cisco Jabber Video for TelePresence.
D. The Cisco Jabber Video for TelePresence only supports Multisite calls, which is enabled by default.
210-065 dumps Correct Answer: B

QUESTION 20
An engineer wants to stream Cisco TelePresence high-definition video to another location. The stream must be connected to an HDMI input on a display. Which two components, at minimum, are required to provide this functionality? (Choose two.)
A. Cisco Media Experience Engine 3500
B. Cisco TelePresence Content Server
C. Cisco Digital Media Player
D. Cisco Digital Media Manager
E. Cisco TelePresence Server
Correct Answer: BC

QUESTION 21
A customer wants to purchase a video endpoint that supports a touchscreen control. The engineer recommends a Cisco TelePresence MX300 endpoint. Which information about this endpoint should the engineer tell the customer?
A. The endpoint comes with the 8-inch touchscreen by default. You can purchase the 10- inch touchscreen with an additional cost.
B. The endpoint comes with the 8-inch touchscreen by default. You do not have the option to purchase the 10-inch touchscreen.
C. You can purchase the endpoint with either the 8-inch touchscreen or the 10-inch touchscreen. You need an additional option key for the 10-inch touchscreen.
D. The endpoint comes with the 10-inch touchscreen by default. You do not have the option to purchase the endpoint with the 8-inch touchscreen.
210-065 pdf Correct Answer: D

QUESTION 22
Which ad hoc multipoint feature is supported only when properly configured and when the endpoint is registered to the Cisco VCS?
A. Multisite
B. Multiway
C. WebEx enabled Cisco TelePresence
D. Collaboration Meeting Room
E. Cisco MCU
F. Cisco TelePresence Server
Correct Answer: B

QUESTION 23
An engineer is configuring a live stream from a multiparty conference that users can watch live in their web browser. Which two products can provide native live streaming in this delivery format? (Choose two.)
A. Cisco Video Communications Server
B. Cisco TelePresence Server
C. Cisco TelePresence MCU
D. Cisco TelePresence Content Server
E. Cisco Multiparty Media Server
F. Cisco TelePresence Conductor
210-065 vce Correct Answer: CD

QUESTION 24
On a Cisco EX90, if the camera is tilted downward toward the base of the unit, how is the image transmitted?
A. black and white
B. rotated 180 degrees
C. with a 2.5x zoom
D. Video transmission is disabled.
Correct Answer: B

QUESTION 25
Which three options can initiate scheduled or rendezvous meetings hosted on a Cisco TelePresence Server? (Choose three.)
A. video endpoint
B. Cisco TMS
C. Cisco Unified Communications Manager
D. Cisco TelePresence Server
E. Cisco VCS
F. Cisco TelePresence Manager
210-065 exam Correct Answer: ABD

QUESTION 26
Refer to the exhibit.

You must dial the interactive response system of the multipoint control unit. What are the appropriate dual-tone multi frequency digits to create an ad-hoc conference with an identifier of 2345?
A. 2345
B. 2345#
C. 5919*2345
D. 5919*2345#
Correct Answer: D

QUESTION 27
Refer to the exhibit.

Which configuration element can be used to specify the Multiway address that can be used by the endpoint to initiate Multiway calls?
A. Conference 1
B. NetworkServices
C. Provisioning
D. SIP Profile 1
E. Video
210-065 dumps Correct Answer: B

QUESTION 28
What do you call the process when one bridge calls into another bridge so that participants on both bridges can see and
hear each other?
A. traversing
B. interworking
C. flowing
D. cascading
Correct Answer: D

See What Our Customers Are Saying:

We at Pass4itsure are committed to our customer’s success. There are 50,000+ customers who used this preparation material for the preparation of various certification exams and this number of customers is enough for new candidates to trust in these products.Our Cisco 210-065 dumps are created with utmost care and professionalism. We utilize the experience and knowledge of a team of industry professionals from leading organizations all over the world.

We provide the Cisco 210-065 dumps exam preparation materials in two different methods, Practice Test Software and PDF Format. The PDF format ensures portability across a number of devices to allow for preparation on the go. “Implementing Cisco Video Network Devices v1.0”, also known as 210-065 exam, is a Cisco certification which covers all the knowledge points of the real Cisco exam. Pass4itsure Cisco 210-065 dumps exam questions answers are updated (281 Q&As) are verified by experts. The associated certifications of 210-065 dumps is CCNA Collaboration,Cisco Video Network Specialist. For a more difficult and more complete Cisco Certified Network Associate Collaboration 210-065 exam preparation practice test software simulates the environment of the real https://www.pass4itsure.com/210-065.html exam.

Compared with other brands, Pass4itsure has up to dated exam information, affordable price, instant exam PDF files downloaded, error correction, unlimited install,etc. Such as Pass4itsure Cisco 210-065 Dumps Try Free Demo, Sale Cisco 210-065 Dumps Exam Collection Is What You Need To Takee,We Help You Pass Implementing Cisco Video Network Devices v1.0. Simple and Easy! To take advantage of the guarantee, simply contact Customer Support, requesting the exam you would like to claim. Pass4itsure guarantee insures your success otherwise get your MONEYBACK!