Where to find Cisco exam 300-075 dump pdf download? The Implementing Cisco IP Telephony & Video, Part 2 v1.0 (300-075 CIPTV2) exam is a 75 Minutes (50 – 60 questions) assessment in pass4itsure that is associated with the CCNP Collaboration certification. The Most Effective Cisco CIPTV2 300-075 dump exam tests Youtube training covers all key points. “Implementing Cisco IP Telephony & Video, Part 2 v1.0” is the exam name of Pass4itsure Cisco 300-075 dump test which designed to help candidates prepare for and pass the Cisco 300-075 exam. If you want to buy Cisco 300-075 study materials online services, then we Pass4itsure is one of the leading service provider’s site. These https://www.pass4itsure.com/300-075.html dump training products to help you pass the exam, we guarantee to refund the full purchase cost. Our website provide all the study materials and other training materials on the site and each one enjoy one year free update facilities.
[Up To Dated -2018 Cisco 300-075 Dump From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWTk00ekx3V0xfX3c
[Up To Dated -2018 Cisco 300-101 Dumps From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWWDdYaFM0SVFwMTA
Kill your exam with Cisco 300-075 dumps real questions(1-20)
QUESTION 1
Which functionality does ILS use to link all hub clusters in an ILS network?
A. Fullmesh
B. Automesh
C. ILS updates
D. multicast
300-075 exam Correct Answer: B
QUESTION 2
Company X has a primary and a backup Cisco Unified Communications Manager instance. The administrator had to do maintenance on the primary node and did a shutdown, which resulted in a failover to the backup node. What happens when the primary node comes back online?
A. The primary node becomes the backup node.
B. Endpoints detect that the primary is back and reregisters automatically.
C. The backup node must be shut down first to allow the endpoints to realize that the primary node is online again.
D. Nothing, the endpoints only failover when the node they lose connection to their registered node.
Correct Answer: B
QUESTION 3
You need to verify if the Media Gateway Control Protocol gateway is enabled and active. Which command should you use for this purpose?
A. show running-config
B. show fallback-mgcp
C. show gateway
D. show ccm-manager fallback-mgcp
E. show running-config gateway
F. show fallback-mgcp ccm-manager
300-075 dump Correct Answer: D
QUESTION 4
Company X has a Cisco Unified Communications Manager cluster and a Cisco Unity Connection cluster at its head office and implemented SRST for its branch offices. One Monday at 2:00 pm, the WAN connection to a branch office failed and stayed down for 45 minutes. That day the help desk received several calls from the branch saying their voicemail was not working but they were able to make and receive calls. Why did the users not realize the WAN was down and prevented access to their voicemail?
A. All the phones should have started ringing the instant the WAN connection failed to signal the start of SRST mode.
B. All calls should have dropped when the WAN failed so users would be instantly aware.
C. Although the phones were still working, the users should have noticed that the phone displays said andquot;SRST Fallback Activeandquot;.
D. The voice administrators at the head office did not call the users to notify them.
Correct Answer: C
QUESTION 5
Which two options must be selected in the SIP Trunk Security Profile configuration between Cisco Unified Communications Manager and Expressway? (Choose two)
A. Enable application-level authorization
B. Accept presence subscription
C. Accept out-of-dialog refer
D. Accept unsolicited notification
E. Accept replaces header
F. Transmit security status
G. Allow charging header
300-075 pdf Correct Answer: DE
QUESTION 6
Which two options should be used to create a secure traversal zone between the Expressway-C and Expressway-E? (Choose two.)
A. Expressway-C and Expressway-E must trust each other\’s server certificate.
B. One Cisco Unified Communications traversal zone for H.323 and SIP connections.
C. A separate pair of traversal zones must be configured if an H.323 connection is required and Interworking is disabled.
D. Enable username and password authentication verification on Expressway-E.
E. Create a set of username and password on each of the Expressway-C and Expressway- E to authenticate the neighboring peer.
Correct Answer: AC
QUESTION 7
Which three statements about configuring an encrypted trunk between Cisco TelePresence Video Communication Server and Cisco Unified Communications Manager are true? (Choose three.)
A. The root CA of the VCS server certificate must be loaded in Cisco Unified Communications Manager.
B. A SIP trunk security profile must be configured with Incoming Transport Type set to TCP+UDP.
C. The Cisco Unified Communications Manager trunk configuration must have the destination port set to 5061.
D. A SIP trunk security profile must be configured with Device Security Mode set to TLS.
E. A SIP trunk security profile must be configured with the X.509 Subject Name from the VCS certificate.
F. The Cisco Unified Communications Manager zone configured in VCS must have SIP authentication trust mode set to On.
G. The Cisco Unified Communications Manager zone configured in VCS must have TLS verify mode set to Off.
300-075 vce Correct Answer: ACE
QUESTION 8
Which command displays the detailed configuration of all the Cisco Unified IP phones, voice ports, and dial peers of the Cisco Unified SRST router?
A. show call-manager-fallback all
B. show dial-peer voice summary
C. show ephone summary
D. show voice port summary
Correct Answer: A
QUESTION 9
Which two actions ensure that the call load from Cisco TelePresence Video Communication Server to a Cisco Unified Communications Manager cluster is shared across Unified CM nodes? (Choose two.)
A. Create a neighbor zone in VCS with the Unified CM nodes listed as location peer addresses.
B. Create a single traversal client zone in VCS with the Unified CM nodes listed as location peer addresses.
C. Create one neighbor zone in VCS for each Unified CM node.
D. Create a VCS DNS zone and configure one DNS SRV record per Unified CM node.
E. In VCS set Unified Communications mode to Mobile and remote access and configure each Unified CM node.
300-075 exam Correct Answer: AE
QUESTION 10
Which command is needed to utilize local dial peers on an MGCP-controlled ISR during an SRST failover?
A. ccm-manager fallback-mgcp
B. telephony-service
C. dialplan-pattern
D. isdn overlap-receiving
E. voice-translation-rule
Correct Answer: A
QUESTION 11
Where can you change the clusterwide DSCP setting for Cisco Unified Communications Manager?
A. enterprise parameters
B. service parameters
C. enterprise phone configuration
D. Ethernet configuration
300-075 dump Correct Answer: B
QUESTION 12
Widgets.com\’s Cisco TelePresence Video Communication Server allows SIP and H.323 registrations. Which local zone search rule configuration allows SIP registered endpoints to connect to H.323 endpoints that register with an H.323 E.164 number only?
Correct Answer: D
QUESTION 13
When using SAF, how do you prevent multiple nodes in a cluster from showing up in the Show Advance section of the SAF Forwarder configuration?
A. Configure the publisher node only in the SAF Forwarder configuration page.
B. Append an @ symbol at the end of the client label value in the SAF Forwarder configuration page.
C. Configure the correct node in the EIGRP configuration of the gateway router that is associated with the Cisco Unified Communications Manager node.
D. Configure the SAF Security Profile Configuration to support only a single node.
300-075 pdf Correct Answer: B
QUESTION 14
Which three commands can be used to verify SRST fallback mode? (Choose three.)
A. show telephony-service all
B. show telephony-service ephone-dn
C. show telephony-service ephone
D. show telephony-service voice-port
E. show telephony-service tftp-bindings
Correct Answer: ABC
QUESTION 15
Which two options are requirements for hardware MTP on Cisco IOS routers? (Choose two.)
A. the same audio codec on both legs of the call
B. an FXO card
C. a binding IP address
D. a hardware transcoder
E. DSP resources
F. a T1 card
300-075 vce Correct Answer: DE
QUESTION 16
An engineer is configuring Global Dial Plan Replication and wants to prevent the local cluster from routing the Vice President number 5555555555 to the remote cluster. Which action accomplishes this task?
A. Create a block route pattern.
B. Create a block learned pattern.
C. Create a block transformation pattern.
D. Create a block translation pattern.
Correct Answer: C
QUESTION 17
Scenario There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phones. The Cisco VCS and TMS control the Cisco TelePresence Conductor, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. Use the exhibits to answer the following questions. DNS Servers
Which three configuration tasks need to be completed on the router to support the registration of Cisco Jabber clients? (Choose three.)
A. The DNS server has the wrong IP address.
B. The internal DNS Service (SRV) records need to be updated on the DNS Server.
C. Flush the DNS Cache on the client.
D. The DNS AOR records are wrong.
E. Add the appropriate DNS SRV for the Internet entries on the DNS Server.
300-075 exam Correct Answer: BCE
QUESTION 18
Which statement about the function of the andquot;+andquot; symbol in the E.164 format is true?
A. The andquot;+andquot; symbol represents the international country code.
B. The andquot;+andquot; symbol represents the international call prefix.
C. The andquot;+andquot; symbol matches the preceding element one or more times.
D. The andquot;+andquot; symbol matches the preceding element zero or one time.
Correct Answer: B
QUESTION 19
Company X has a Cisco Unified Communications Manager cluster and a VCS Control server with video endpoints registered on both systems. Users find that video endpoints registered on Call manager can call each other and likewise for the endpoints registered on the VCS server. The administrator for Company X realizes he needs a SIP trunk between the two systems for any video endpoint to call any other video endpoint. Which two steps must the administrator take to add the SIP trunk? (Choose two.)
A. Set up a SIP trunk on Cisco UCM with the option Device-Trunk with destination address of the VCS server.
B. Set up a subzone on Cisco UCM with the peer address to the VCS cluster.
C. Set up a neighbor zone on the VCS server with the location of Cisco UCM using the menu option VCS Configuration andgt; Zones andgt; zone.
D. Set up a SIP trunk on the VCS server with the destination address of the Cisco UCM and Transport set to TCP.
E. Set up a traversal subzone on the VCS server to allow endpoints that are registered on Cisco UCM to communicate.
300-075 dump Correct Answer: AC
QUESTION 20
An administrator is setting up analog phones that connect to a Cisco VG310. Which type of gateway or trunk on Cisco Unified Communication Manager for the Cisco VG310 must the administrator set up to allow the phones to have the call pickup feature?
A. 323 gateway
B. SCCP gateway
C. 225 trunk
D. MGCP gateway
E. SIP trunk
Correct Answer: C
QUESTION 21
Company X has deployed a VCS Control with a local zone and a traversal client zone. To facilitate external calls, VCS Expressway is deployed and traversal server zone is set up there. Video endpoints inside Company X have registered but are unable to receive calls from outside endpoints. Which option could be the cause of this issue?
A. The access control list on the VCS Control must be updated with the IP for the external users.
B. When a traversal zone is set up on VCS Control only outbound calls are possible.
C. The local zone on the VCS Control does not have a search rule configured.
D. The traversal zone on the VCS Control does not have a search rule configured.
300-075 pdf Correct Answer: C
See What Our Customers Are Saying:
We at Pass4itsure are committed to our customer’s success. There are 50,000+ customers who used this preparation material for the preparation of various certification exams and this number of customers is enough for new candidates to trust in these products.Our Cisco 300-075 dump are created with utmost care and professionalism. We utilize the experience and knowledge of a team of industry professionals from leading organizations all over the world.
If these Cisco 300-075 dump training products do not help you pass the exam, we guarantee to refund the full purchase cost. Pass4itsure guarantee 100% success. “Implementing Cisco IP Telephony & Video, Part 2 v1.0”, also known as 300-075 exam, is a Cisco certification which covers all the knowledge points of the real Cisco exam. Pass4itsure Cisco 300-075 dump exam questions answers are updated (383 Q&As) are verified by experts. The associated certifications of 300-075 dump is CCNP Collaboration. Pass4itsure is recognized as the leader of a professional certification exam, it provides the most comprehensive certification standard industry training methods. You will find that Pass4itsure Cisco https://www.pass4itsure.com/300-075.html exam questions and answers are most thorough and the most accurate questions on the market and up-to-date practice test.
Compared with other brands, Pass4itsure has up to dated exam information, affordable price, instant exam PDF files downloaded, error correction, unlimited install,etc. Such as Pass4itsure Cisco 300-075 Dump Try Free Demo, The Most Effective Cisco 300-075 Dump Exam Tests Covers All Key Points,We Help You Pass Implementing Cisco IP Telephony & Video, Part 2 v1.0. Simple and Easy! To take advantage of the guarantee, simply contact Customer Support, requesting the exam you would like to claim. Pass4itsure guarantee insures your success otherwise get your MONEYBACK!
